What if I encounter a stainless steel sink jam? Stainless Steel Kitchen Cabinets manufacturers share kitchen sink clogging solutions:

1. If you find that the kitchen sink is clogged, you should first turn off the faucet. Never try to wash down the impurities in the sink by the impact of water, waterproofing will cause more water accumulation.

2. When the sink is clogged, you should first look at what is blocking it. In general households, the kitchen drain is blocked at the U-shaped bend. Some sewer pipes will have sewage screws, so you only need to unscrew them, and then use steel wire to pass the two sides down. If you still can’t solve it, you can remove all the sewer pipes, unscrew all the plastic connections, rinse out the impurities inside, and then assemble them one by one, so that it can be done in less than half an hour.

3. In general households, the sewer pipes are blocked by greasy. Therefore, before dredging, you can burn a pot of boiling water and the sewer pipes will become better. When dredging, you can use tools such as hands or hooks to reach into the drain pipe to remove the dirt and impurities blocked in it. If you are a user on the first floor, you should check whether the outdoor sewer pipe has pushed the drain pipe blocked by fallen leaves or silt.

4. If there is no obvious blockage in the drain pipe of the sink or sink, the overflow hole can be blocked with a damp cloth, and then the sludge can be used to remove the silt. If the clasp cannot remove the blockage, you can first place a bucket at the water trap of the drain, and then unscrew the bend to remove the blockage inside.

5. If the clogging problem cannot be solved, it means that the silt is clogged in the depth of the short knife. This should be notified to the repairer in time to prevent the clogging from accumulating water in the pool for a long time.

The above content is organized and shared by the Handmade Sink manufacturer, hoping to help those in need.

コメント