Kitchen Faucets Manufacturers introduces what is in-wall faucet and pull faucet

1. The wall-mounted faucet has a very high appearance value, but because its position is fixed, it is not convenient to replace and maintain it. It is necessary to measure the size before installation. It is very cool to install in the bathroom. The gap between the faucet and the sink and washbasin is prone to dirt due to long-term accumulation of water, and the wall-mounted faucet does not have the problem of sanitary corners, which saves a lot of time to clean the faucet.

2. Pull-out faucet. The pull-out faucet that can rotate 360 ​​degrees to spray water looks the same as an ordinary faucet, but the front water outlet can be pulled out entirely. The advanced faucet can be switched by pressing the button and can be operated with one hand, which is more convenient.

Through the above introduction, Stainless Steel Faucets Manufacturers hopes that you can simply refer to the content of this article in future use.

The manufacturer of Lavatory Cabinet introduces how to choose the right mirror for the bathroom?

1. The shape of the mirror. When choosing a bathroom mirror, the first issue is of course to consider the choice of shape. Many people will choose according to their personal preferences, otherwise they will choose according to the design style, but they will rarely consider it from the perspective. Generally speaking, bathroom mirrors are mainly square and round, which is in line with our principle of "square and round". In addition, elliptical shapes are also acceptable, that is, those with sharp edges and corners are not available. Polygons and diamonds are best not to be used.

Second, the assembly of mirrors. Modern people like to pay attention to creativity and innovation, so some families choose large mirrors made of small mirrors. Although it looks beautiful and beautiful, it adds a lot of trendy elements, but it is not advisable from an academic point of view. Because the original mirror is about a whole, and the clearer the better. If it is specially designed as a combination of small mirrors, the reflected image will be fragmented. In the long run, it will not only lead to family indecision and decline in fortune, but also threaten health.

Third, the size of the mirror. In choosing the size of the mirror, most of us are more casual, as long as it meets the overall design.

The above content is organized and shared by Stainless Steel Faucets manufacturer, hoping to help those in need.

Stainless Steel Faucets are necessities in the kitchen, is it an installation single? Is it better to double? Let’s take a look at the characteristics of the single and double taps.

1. Features of single tap
If your kitchen area is not large, then it is most suitable to choose a single faucet. It is very convenient to adjust the water temperature and water output with one handle. Single-handle faucets are mainly divided into desktop single-handle faucets and single-handle pull-out faucets.
(1) The desktop single-handle faucet is more common in the kitchen. One handle makes the operation very simple. It is practical to adjust the water flow size and water temperature by adjusting it up, down, left and right.
(2) The biggest advantage of the single-handle pull-out faucet is that it can more easily clean the corners of the kitchen, and the places out of the reach of ordinary faucets, expand the cleaning area, and bring convenience to the kitchen.

2. Features of double-handle faucet:
This type of faucet occupies a little more area than a single faucet, but it has powerful functions and can enjoy cold water and hot water at the first time, which is more practical and beautiful.
(1) Desktop double-handle faucet: The hole on the kitchen basin determines whether this faucet can be used, so it is best to use a matching product, and the two handles respectively control the cold and hot water. If you have children in your family, then the design of this faucet is safer, and you will try to avoid things that cause hot hands because you can’t distinguish between cold and hot water.
(2) Wall-mounted faucet: You can freely match different types of kitchen basins according to your preferences, and make full use of the wall above the kitchen basin, which saves space and is very beautiful. However, because domestic architectural design rarely uses water channels in the kitchen, it is relatively difficult to repair, mainly because all the water pipes are buried in the wall.


The above content is compiled and shared by the Lavatory Cabinet manufacturer, hoping to help those in need.

Maintenance Methods of Stainless Steel Faucets :

1. During installation, the faucet should not collide with hard objects as far as possible and do not leave cement, glue, etc. on the surface so as not to damage the luster of the surface coating. Attention should be paid to removing impurities from the pipeline and then installing the faucet.

2. If a decrease in water output is found after normal use for a period of time, the screen cover can be gently unscrewed at the outlet of the faucet to remove impurities and generally recover.

3. The metal hose of the shower head of the bathtub faucet should be kept in a natural stretch state, and should not be coiled on the faucet when not in use. At the same time, when using or not using, pay attention to the joint between the hose and the valve body not to form dead angles so as not to break or damage the hose.

4. Don’t push the faucet too hard, just turn it gently. Even traditional faucets do not need to be screwed to death with great effort. In particular, do not use the handle as a handrail to support or use it.

The above content is organized and shared by the Lavatory Faucet Manufacturers, hoping to help those in need.

I’ve seen Kitchen Faucets a lot, but I don’t know how much you know about the structure of the faucet. Generally speaking, the faucet is divided into four parts: water outlet, control, fixing and water inlet.

The faucet is fixed on the basin, sink, etc. by fixed parts. The water enters the control part through the water inlet hose, and then we adjust the water temperature and volume through the control part, and finally the water flows out through the faucet. This is about the operation process.

There are many types of water outlets, such as ordinary water outlets, rotating water outlets with elbows, pull-out water outlets, waterfall water outlets, etc. When purchasing a faucet, pay attention to the size of the basin and sink.


The above content is compiled and shared by the Lavatory Cabinet supplier, hoping to help those in need.

How do Lavatory Cabinet manufacturers share popular concepts for sinks?
The sink with built-in knife holder is of little significance. The knife holder is difficult to clean, and it is not so easy to handle.

Sink with dishwasher-it is really easy to use, but it is also really expensive. You can only decide whether to install it according to the family situation.

There is a bucket drawer under the sink, which can indeed accommodate some dish brushes, rags, etc., but it is not necessary without considering the problem of draining.

It is useful to make a concave drawer under the sink, which can contain detergent and various dishwashing brushes. But it needs to be highly customized, otherwise it is useless.

The above content is organized and shared by the Stainless Steel Faucets manufacturer, hoping to help those in need.

When it comes to the bathroom, people’s first thought is that it is too humid, so when designing washbasins and other places that are often exposed to water, people often pay more attention to choosing waterproof Lavatory Faucet . In addition to eating, niches are also designed. Here are three ways to design niches:


1. Make good use of the concave structure of the wall

Many apartment types are not completely neat, and many bathroom types have the feeling of "compressed" space. Sometimes it seems that there is enough space, because of the influence of two load-bearing walls, it was shelved and abandoned. In fact, at this time, you may try to use the concave structure to make an alcove. Only a partition or shelf is needed to reach it completely. The role of niches.

2. Make good use of the wall of the sewer pipe

In the decoration process, some toilets need to include a water pipe. At this time, the wall of the water pipe can be fully used. Make a suitable niche above the water pipe or the space behind the toilet, whether it is placed or plants Not bad, especially the latter can also purify the air.



3. Make niches on the partition

The toilet partition is a common design in the home, especially the wall partition can not only prevent moisture but also waterproof, and at the same time, it can also make a big fuss on the wall. At this time, a groove was dug in the partition, which can not only create a decorative feeling, but also meet the function of the alcove.

The above content is organized and shared by Stainless Steel Faucets Manufacturers, hoping to help those in need.

First of all, it is important to buy the five elements of Stainless Steel Kitchen Cabinets. These five elements are mainly manifested in the following aspects:

1. The quality of the material

If the quality of the cabinets is poor, the use time will be very short, and it will affect the appearance and is not practical. The cabinets of good materials are beautiful and practical.


2. Excellent workmanship

The cabinets must be finely crafted and must be used solidly. Unstable cabinets must be problematic to use.


3. Whether the appearance is beautiful

The appearance mainly depends on the individual’s aesthetic. Some people like fashion, some like classical, some like China or European style and so on.


4. Color matching

The choice of colors is basically the same as the appearance, completely based on personal preferences. However, when buying or customizing, you should also consider whether it is in harmony with the overall tone of the kitchen.

5. Good service

After-sales service is a very critical point, especially regarding the after-sales service of valuables.


The above content is organized and shared by the Handmade Sink manufacturer, hoping to help those in need.

Maintenance methods of Stainless Steel Kitchen Cabinets :

(1) Avoid hot pot during use. The hot water bottle is in direct contact with the cabinet, preferably placed on the pot rack.

(2) Avoid touching the countertops and door panels with sharp objects to avoid scratches.

(3) Avoid placing dyes or hair dyes directly on the countertop. Chemical substances can erode the countertops of many materials.

(4) The door panels and countertops of cabinets use different cleaning methods according to different materials.


The above content is organized and shared by the Handmade Sink manufacturer, hoping to help those in need.

The following is the design plan of the table size of Stainless Steel Kitchen Cabinets :

1. In the vegetable washing area, we recommend installing a 600mm single-sink vegetable washing basin for sufficient use (800 or 900 double basins are not very efficient and waste space). The single basin can save the table space to the maximum extent.

2. The vegetable cutting area should be as large as possible. The vegetable cutting area should be greater than or equal to 500mm. The larger the space, the better. If the vegetable cutting area + vegetable preparation area ≥750mm, it will not feel cramped.

3. There should be enough space on both sides of the stove to select the vegetable area and cooked area ≥ 450mm, which is more convenient to use. To cook good dishes, there needs to be a space to hold dishes, and a space to temporarily put pots and pans, so the stove should not be designed at the edge, and there should be enough space around it to make it convenient to use.

4. There is plenty of space in the small home appliance area reserved on the countertop, and a whole small home appliance area should be reserved for the three major appliances that are frequently used in life: kettles, rice cookers, and kettles. Small household appliances area ≥700mm, if the space is limited, this area can coincide with the preparation area or cooked area.

Actually, it is not necessary to make all the cabinets into upper and lower wall cabinets. You can design a tall cabinet with a width of 60 cm to store ovens, microwave ovens, and small appliances. It is very practical to use.

Countertop size summary: vegetable sink: minimum 600mm cutting area: minimum 500mm preparation area: minimum 450mm cooktop: 800mm cooked area: minimum 450mm small appliance area: 700mm (can be overlapped with preparation area or cooked area)

The above information is compiled and shared by the Handmade Sink manufacturer, hoping to help those in need.

The stainless steel sink is an important part of the family kitchen, which plays a very important role in the kitchen. Therefore, we must be particularly careful when choosing. If you choose a bad sink, it will affect our use. Buying a good sink can also save us a lot of costs. Therefore, we must pay more attention to the choice of sinks when buying. The following Stainless Steel Kitchen Cabinets manufacturers will take you to understand how to buy stainless steel sinks?

1. The width of the sink is determined according to the width of the countertop of the kitchen cabinet. The width of the general sink should be the kitchen countertop minus 10 cm. At the same time, according to the characteristics of the domestic kitchen countertop size of 50cm~60cm, it can be concluded that the reasonable width of the sink is 43cm~48cm;

2. The material used is SUS304-2B stainless steel plate, the thickness of the material is moderate, preferably 0.8mm~1.2mm, too thin affects the service life and strength of the sink, and too thick loses its strength and easily damages the washed dishes.

3. Under normal circumstances, the cleaning tank with large volume has good practicability, and the depth is preferably 180mm~220mm, which can effectively prevent the splash of water splashes. At the same time, the depth is also an important indicator that reflects the grade of the tank. It belongs to high-end products.

4. The surface treatment of the sink is matte and mercerized, which is beautiful and practical. It not only has no glare, but also can withstand repeated wear and tear of porcelain and tableware. It is easy to clean and is often used as new.

5. According to the washing characteristics of Chinese households, it is best to choose a large caliber, made of stainless steel, with a storage basket.

The above content is shared and organized by Handmade Sink manufacturers, hoping to help those in need.

What if I encounter a stainless steel sink jam? Stainless Steel Kitchen Cabinets manufacturers share kitchen sink clogging solutions:

1. If you find that the kitchen sink is clogged, you should first turn off the faucet. Never try to wash down the impurities in the sink by the impact of water, waterproofing will cause more water accumulation.

2. When the sink is clogged, you should first look at what is blocking it. In general households, the kitchen drain is blocked at the U-shaped bend. Some sewer pipes will have sewage screws, so you only need to unscrew them, and then use steel wire to pass the two sides down. If you still can’t solve it, you can remove all the sewer pipes, unscrew all the plastic connections, rinse out the impurities inside, and then assemble them one by one, so that it can be done in less than half an hour.

3. In general households, the sewer pipes are blocked by greasy. Therefore, before dredging, you can burn a pot of boiling water and the sewer pipes will become better. When dredging, you can use tools such as hands or hooks to reach into the drain pipe to remove the dirt and impurities blocked in it. If you are a user on the first floor, you should check whether the outdoor sewer pipe has pushed the drain pipe blocked by fallen leaves or silt.

4. If there is no obvious blockage in the drain pipe of the sink or sink, the overflow hole can be blocked with a damp cloth, and then the sludge can be used to remove the silt. If the clasp cannot remove the blockage, you can first place a bucket at the water trap of the drain, and then unscrew the bend to remove the blockage inside.

5. If the clogging problem cannot be solved, it means that the silt is clogged in the depth of the short knife. This should be notified to the repairer in time to prevent the clogging from accumulating water in the pool for a long time.

The above content is organized and shared by the Handmade Sink manufacturer, hoping to help those in need.

Compared to traditional cabinet materials, Stainless Steel Kitchen Cabinets are more resistant to corrosion, high temperature, oil, water, fire, and termite chewing, and have become popular hygienic materials.

Its three major standards:

1. Stainless steel non-radiation test.

2. The stainless steel material is truly in direct contact with food.

3. Stainless steel is recyclable and reused.

The above content is organized and shared by the Handmade Sink manufacturer, hoping to help those in need.

The simple and generous style has always been a favorite decoration style in the home improvement industry. In order to match the decoration style, many customers will choose some white and other light-colored furniture and cabinets when choosing furniture, but the light-colored cabinets are prone to stains and affect the appearance. The following is for laundry Cabinet, Stainless Steel Sink Manufacturers has organized a few tips for removing stains from the laundry cabinet.

1. Burn marks: What should I do if the exterior of the laundry cabinet is accidentally burnt by cigarette butts or lighters? You can wrap a pair of chopsticks with a fine-grained hard cloth, scrub the broiled area with the chopsticks, and then apply a thin wax solution for maintenance.

2. Burn marks: Carefully place high-temperature containers on the laundry cabinet to form white burn marks. If it is found in time to scrub in time, the burn marks will disappear quickly, but if it is found later and the marks are deeper, you can use iodine on the burn marks, apply some petrolatum, and wipe it with a soft cloth in a few days, the burn marks will be reduced light. In addition to the smell of formaldehyde when the laundry cabinet is bought back, the laundry cabinet has been used for a long time, especially in the rainy weather. The laundry cabinet will show a musty smell. These flavors are simply absorbed by the clothes. The clothes that do not want to wear on the body carry these difficulties. Smell the smell, deodorize the laundry cabinet immediately.

3. Scratches: The laundry cabinet shows scratches, and it is necessary to identify the conditions of these scratches. If there is no damage to the paint film of the laundry cabinet, you can simply use cotton cloth dipped in some molten wax to evenly correct the scratches. Attention should be paid to covering up all the scars. After the wax is dry and hard, repeat it many times until the scratches are not so obvious.

4. In addition to mildew smell: determine the degree of mildew in the laundry cabinet. If the wardrobe and clothes are moldy, you need to wipe the mold on the outer surface of the laundry cabinet with a dry cloth. You can also use a cloth dipped in cleaning liquid to scrub. After a while, use a hairdryer to dry the exterior, and put a layer of paper or wardrobe pad on the laundry cabinet. To avoid moldy smell in the wardrobe, unpack the soap you bought, put it in a ventilated box, put it in the corner of the wardrobe, and put 1-2 on each floor. This can effectively avoid the moldy smell of the laundry cabinet.

5. Formaldehyde removal: The newly purchased laundry cabinet needs to be well ventilated and placed with activated carbon to absorb formaldehyde. Perhaps the right amount of black tea is poured into the washbasin and placed in the closet, and the window is ventilated and ventilated, and the formaldehyde content will decrease within 48 hours. The scientific method is to use the "photocatalyst" method to remove formaldehyde from the wardrobe.

The above content is organized and shared by Stainless Steel Laundry Cabinet manufacturers , hoping to help those in need.

In general, the life of the Handmade Sink in the kitchen is relatively long, but as time goes by, the sink is easy to lose luster and even rust. This requires us to pay attention to protect the sink in our daily life Everyone introduces several common maintenance measures.

Do not place tools or other rusty objects made of mild steel, metal, or strong materials in or on the sink during installation or interior decoration. When using the sink for the first time after installation, turn on the faucet for 5 minutes to clean all impurities. In the normal use process, it is not appropriate to put the wok just finished cooking on the sink. Because the temperature of the wok is too high, when it comes into contact with the sink, it will inevitably cause damage to the surface of the sink. When washing some salt-rich foods such as kimchi, mayonnaise, etc., you should control the time and do not stay in the sink for too long. The corrosion of the material of the sink by salt is also very strong. In order to prevent it from corroding the sink, it makes the appearance flash marks that are difficult to clean.

If the sink flashes rust or mildew, etc., you can use scouring powder or toothpaste on the rust and spots, and wipe it clean with a rag. Remember not to scrub with a steel ball, otherwise it will damage the protective layer of the sink surface. Do not cut food or chop hard objects directly on the sink panel to prevent scratching the sink or changing the shape of the sink. In addition, when using other sharp objects and iron wire, don’t rub on it. Do not place low-carbon steel or cast iron cookware in the sink for a long time, or leave rubber dishwashing tablets, wet dishwashing sponges or other cleaning pads in the sink.

When using the sink for the first time after the new house is renovated, drain the water for 5 to 10 minutes, put the water containing rust in the water pipe clean, and wipe the surface of the sink clean with a soft cloth. If there is floating rust phenomenon, you can use talcum powder and toothpaste to apply on the rust spots and spots, and then clean it with a scrubbing cloth. You can’t wipe it with a steel ball.

After each use, clean the tank body and dry it with a rag, without using strong acids and alkalis to clean the items in the sink. A layer of oil can be applied to the appearance of the sink to avoid floating rust caused by metal debris during the decoration process. If the water tank is not used for a long time, a layer of oil can also be applied to the water tank to protect the water tank.

The above content is organized and shared by the Stainless Steel Kitchen Cabinets manufacturer, hoping to help those in need.

What are the processing methods for Stainless Steel Sink Manufacturers ?

The corner treatment of stainless steel sinks on the market is diverse, including flat-edged square corners, rounded corners, thin edges, beveled edges, and floating edges. Among them, the square corner can be used as a counter basin or under counter basin, but because it is a square corner, on the one hand, the viewing angle is not very good, and its load bearing capacity is not very strong, plus its transportation process It is easy to fold the corners in the middle, so it is used less; the flanging on the one hand enhances the flatness of the sink.

On the other hand, the reinforced ribs make the sink load stronger and have a good water-blocking effect. It does not allow water to flow to the countertop. Many sink manufacturers like this technology, but it must be double-layered to have an effect. As you can see in the market, many are unilateral. At the same time, the edges of high-grade stainless steel sinks are generally flat without large bends.

The above content is organized and shared by the Stainless Steel Laundry Cabinet manufacturer, hoping to help those in need.

There is no protective coating on the bottom of Handmade Sink : the protective coating added to the bottom of the sink is used for quiet sound and anti-condensation. The better coating is to use mortar to spray the entire back surface of the sink. Generally, a rubber gasket is attached to the bottom, which can also play a quiet sound effect.

The size of the sink: There is no problem with the length. The width is very important. The width should refer to the width of the countertop. The standard countertop width is 55CM and 60CM. However, there are special things in most cases. The countertop of the old house is mostly 50CM. The width of the sink selected for the 55CM countertop should be within 45CM. The width of the selected sink for the 60CM countertop can be installed as long as it does not exceed 50CM, but the width of the selected sink for the 50CM countertop is relatively narrow, and the maximum width cannot exceed 41CM. One thing is very important.

Sink installation methods: There are two types, above counter type and under counter type, so the sink has two types of above counter basin and under counter basin, which are generally made into above counter type, but in recent years, under counter type The wind is quietly blowing, the under-table style is more beautiful, giving a refreshing feeling, the countertop is easier to manage, but the cabinet company will charge more for the under-style style.

The above content is organized and shared by Suppliers of Stainless Steel Kitchen Cabinets , hoping to help those in need.

Stainless Steel Sink Manufacturers will tell you about the maintenance precautions of Stainless Steel Laundry Cabinet today.

1. The decorated house should pay attention to opening windows to avoid corrosive gas emitted by the decoration materials and destroy the protective film on the surface of stainless steel.
2. After using the balcony laundry cabinet, dry it with a dry cloth to prevent water droplets from remaining on the surface. Water with high iron content may cause brown-red colored traces on some stainless steel surfaces.
3. The retained water will cause mineral deposits to occur. In this case, a low-concentration vinegar solution can be used to remove such deposits, and then completely cleaned with clean water.
4. When cleaning some dead corner dirt of stainless steel bathroom products, avoid using steel brushes or brushes with rough texture to avoid scratching the surface.
5. Stainless steel bathroom products such as balcony laundry cabinets usually use neutral detergent when cleaning the surface, and scrub gently.

Stainless Steel Kitchen Cabinets can just make up for the defects of wooden cabinets, so the stainless steel kitchen utensils that only appeared in hotels restaurants and canteens have been introduced into the ranks of family cabinets. The stainless steel overall cabinets reveal a strong postmodern character A plate of delicious food and vegetables is presented in the kitchen of the hotel, just like the industrial precision casting, which is refreshing and meticulous.


The design of stainless steel cabinets is mostly simple straight lines, horizontal and vertical, reducing unnecessary decorative lines, thereby creating a sense of spaciousness. In such a main atmosphere, sinks, stoves and cooker hoods of the same material can be embedded in a more subtle manner, and they feel seamless.


In order to prevent hard cabinets and hanging cabinets from making noise due to opening and closing, cabinets will be equipped with silencer bars in these places, so that you can enjoy quiet cooking time.



The stainless steel whole cabinet can be divided and combined, all the components can be installed and combined freely, and the functions are complete. The stainless steel countertop looks very avant-garde, including Handmade Sink is also very fashionable. And it’s not easy to get dirty. Even if it is contaminated with oil, it is easy to clean up, and it will be as bright as new after many days of use. It has a cool touch in summer, which can eliminate the hot and irritated feeling brought by the cooking process. The highlight is that among all the materials currently available for kitchen countertops, stainless steel ranks first in the anti-bacterial regeneration ability, so cooking food on it should be the most hygienic.

With the continuous expansion of the use of stainless steel, many laundry cabinets have also begun to use stainless steel as the main material. Now, with the manufacturer of Stainless Steel Laundry Cabinet, take a look at the quality of stainless steel laundry cabinets and the selection skills of Stainless Steel Laundry Cabinet .

1. Is the stainless steel laundry cabinet good?
Stainless steel is generally used in construction because it is a harder substance in metal materials, and stainless steel is difficult to produce rust, corrosion or damage. It is resistant to corrosion and high temperatures, regardless of temperature. Therefore, the stainless steel laundry cabinet also has the above advantages. Let us purchase one at a time without having to buy a second laundry cabinet. Environmental protection is also the primary task of today. A good home environment will make us have a good mood. The stainless steel laundry cabinet is made of epoxy resin, which can be said to not emit harmful substances. It has a great environmental protection effect on the home environment. The main thing is that stainless steel has good impact resistance. But the disadvantage of stainless steel is that the cost is very high, it is difficult to raw materials, and the material is allowed, and the cabinet is thin. However, this has a very negative impact on the popularity of stainless steel laundry cabinets.

2. Stainless steel laundry cabinet purchase skills:
When selecting a stainless steel laundry cabinet, you can freely choose to prepare it with the washing machine, so that it can be used separately. If the laundry cabinet will be exposed to the sun for a long time, it is best to install a curtain to block the sunlight when the laundry cabinet is not in use. On the countertop of the free choice laundry cabinet, if the free choice is a ceramic basin surface, the size of the free choice is generally smaller, but it is easier to deform, and the service life of the large-sized artificial stone will be longer, but it is clear what to choose The countertop of material depends on the actual size of the stainless steel laundry cabinet. In the free choice of laundry cabinets, you can freely choose more practical ones, such as soap nets for placing soap, a basket for temporarily placing dirty clothes, and towel bars for drying towels. And after free choice, see if it matches your own decorating design.



information about Stainless Steel Laundry Cabinet : https://www.afastainlesskb.com/product/